いきなり購入するのは不安、という方も多いはずです。CertShikenではC-TSCM42-67(SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7)の無料サンプルを公開しており、2026年時点の問題の質や形式を、購入前にご自身の目で確かめられます。
SAP C-TSCM42-67 試験概要:
SAP C-TSCM42-67 試験シラバストピック:
| セクション | 目標 |
|---|---|
| 生産計画における企業構造とマスタデータ | - 作業区および作業手順 - SAP PP における組織単位 - 品目マスタおよび BOM(部品表) |
| かんばん方式およびジャストインタイム(JIT)生産 | - JIT 補充コンセプト - かんばん管理サイクル |
| 資材所要量計画(MRP) | - ロットまとめ方式と調達提案 - MRP タイプと計画実行 - 例外メッセージと評価 |
| 製造指示と実行 | - 指示の登録とリリース - 指示の決済とステータス管理 - 指示の確認と在庫移動 |
| 需要管理および営業・生産計画(S&OP) | - 計画独立所要量(PIR) - 営業・生産計画の統合 |
| 能力計画と製造現場管理 | - 能力評価と能力調整 - 詳細スケジューリング |
C-TSCM42-67受験前に知っておきたいQ&A
C-TSCM42-67は、SAPが実施する「SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7」の認定試験です。この試験に合格すると、「SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7」の認定を取得できます。認定レベルはアソシエイトに位置づけられています。関連する認定にはSAP Certified Application Associate - Production Planning & Manufacturing、SAP Certified Application Associate - SAP ERPなどがあります。公式の出題範囲に沿って基礎から応用まで問われるため、CertShikenの108問の練習問題で出題傾向をつかんでおくと、効率的に対策を進められます。
C-TSCM42-67の出題数は80、試験時間は180 分です。試験時間を問題数で割ったペースをあらかじめ計算しておき、1問にかけられる時間を意識しながら解くことが大切です。難問に時間を使いすぎて後半が間に合わなくならないよう、本番前にCertShikenの模擬試験で制限時間付きの演習を重ね、時間配分の感覚を身につけておくと安心です。
C-TSCM42-67の合格点は65%、受験料はUSD 550(地域により異なります)です。不合格になった場合、再受験には再度全額の受験料がかかるため、本番の前にCertShikenの108問の練習問題で自己採点を行い、合格点を安定して上回れる状態にしておくことをおすすめします。
C-TSCM42-67の受験条件について、公式には次のように案内されています。SAP ERP のナビゲーションおよび生産計画プロセスの基礎知識が推奨されます。事前の SAP ERP または SAP PP の実務経験があると有利ですが、必須ではありません。
C-TSCM42-67の受験申し込みは、以下の公式窓口から行えます。
なお、受験方式はSAP Certification Hub を介したオンライン監視付き試験となっています。
公式では、以下のトレーニングが推奨されています。
公式トレーニングで知識を整理したうえで、CertShikenの108問の練習問題でアウトプットを重ねれば、試験対策の完成度をさらに高められます。
はい。CertShikenではC-TSCM42-67問題集の無料サンプルをご用意しており、収録問題の質や構成を購入前にお確かめいただけます。ご購入後は365日間の無料更新が付き、更新期間の終了後も50%割引で更新を継続できるため、長期的な学習にも安心してご利用いただけます。
万が一、ご購入後60日以内にC-TSCM42-67試験を受験して不合格となった場合には「返金保証」が適用され、全額をご返金いたします。受験票(受験申込証明)のコピーと公式スコアレポート(Score Report)のPDFを試験実施後2日以内にご提出いただければ、提出後7日以内に手続きが完了します。なお、ご購入後3日以内の受験は対象外(準備期間が短すぎるため)、ダウンロードのみで実際に受験されなかった場合、無料資料や期限切れのご注文も対象外となり、受験者名とお支払い者名が一致している必要があります。返金の代わりに、同等価値の試験対策資料2つを無料でお受け取りいただく選択肢もあり、この場合は元の製品の更新サービスもそのまま継続してご利用いただけます。商品のお届けは、お支払い完了後すぐにダウンロードいただけるほか、1分以内にご登録のメールアドレスへもお送りします。2時間経っても届かない場合はカスタマーサポートまでご連絡ください。インストール可能なパソコンの台数に制限はありません。
C-TSCM42-67の出題範囲は、全部で6の分野で構成されています。主な分野としては、「かんばん方式およびジャストインタイム(JIT)生産」、「能力計画と製造現場管理」、「資材所要量計画(MRP)」などが挙げられます。各分野の詳細なトピックと配点は、このページ上部に掲載している試験概要(出題範囲)にまとめていますので、学習計画を立てる際の参考にしてください。
SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 認定 C-TSCM42-67 試験問題:
問題 #1
In your company planning strategies are used in the SAP-ECC demand management that are based on consumption. Which of the following statements about consumption is true?
(Choose two.)
A. The consumption parameters (consumption mode and consumption interval) can be set in the material master or in the MRP group.
B. Consumption always takes place on the material level between the planned independent requirements and the planned orders.
C. A consumption situation is dynamic and is always restructured with the planning run.
D. Consumption can also take place between order reservations and planned independent requirements, depending on the strategy.
問題 #2
You want to produce a finished product only when it is requested by a customer order in make-to-order production. However, all assemblies need to be procured beforehand.
How can you fulfill these requirements in SAP ECC? (Choose two)
A. Use strategy 50 (planning without final assembly) for the finished product and no strategy for all assemblies in the bill of material.
B. Use strategy 20 (make-to-order production) for the finished product and strategy 70 (planning at the assembly level) for all assemblies in the bill of material.
C. Use strategy 40 (planning with final assembly) for the finished product and strategy 70 (planning at the assembly level) for all assemblies in the bill of material.
D. Use strategy 30 (production by lots) for the finished product and strategy 70 (planning at the assembly level) for all assemblies in the bill of material.
問題 #3
What can you use to organize material staging for production orders? (Choose three)
A. KANBAN
B. Transfer orders
C. Pull list
D. Logistics Information System (LIS)
E. Material documents
問題 #4
Which of the following are characteristics of ECC master production scheduling (MPS)? (Choose three)
A. MPS items can be defined on plant level.
B. MPS items are planned in a standard MRP run.
C. Non-MPS items can be taken into consideration by an MPS run.
D. MPS items can be defined on MRP area level.
E. The planning of MPS and non-MPS items is always carried out in one planning run.
問題 #5
Where can you define the default storage location for the material component of a production order? (Choose three)
A. Material master (component)
B. BOM header (product)
C. Production version (product)
D. Production supply area of a work center
E. Routing
解説:
| 問題 #1 正解: A、D | 問題 #2 正解: A、B | 問題 #3 正解: A、B、C | 問題 #4 正解: A、C、D | 問題 #5 正解: A、C、D |
ヘルプがないなら、全額返金
CertShikenはヘルプがないなら、全額返金という承諾を通して、自分の商品に自信があります。我々が開発してから、我々の商品を利用して試験に失敗することを見たことがありません。このフィードバックで、我々はあなたの我々の商品から得る利益と試験に合格する高い可能性を確保できます。
我々は、あなたのC-TSCM42-67 - SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7 認証試験を準備するとき、あなたの投資する努力、時間とお金はあなたの失敗に悲しくて失望することを理解しています。我々はあなたの痛さと失望を減少することができなく、でも、我々はあなたの金融損失を担うことができます。
これは、ある原因のため、あなたは我々の商品を利用して試験に失敗したら、我々は我々の商品での支出をあなたに戻り返すことを表明します。あなたは試験に失敗してからの7日以内であなたの失敗した報告書を我々にメールを送るだけです。

クリック」


橘*子
Oosawa
枡田**
Hinata
仁川**
Kouno

